GF Piping Systems

Gary Van Schooneveld is President of CT Associates, Inc. Gary has over 30 years of experience with high-purity fluid systems including chemical delivery and ultrapure water and the development and testing of their associated materials and components. He is the author or co-author of more than 45 technical papers and presentations. Gary is co-chair of the SEMI UPW Task Force and an active member of the IRDS UPW and IRDS Critical Components Task Forces. Gary as been a key contributor in the development and validation of SEMI specification for measuring filter retention below 15 nm (SEMI C79), particle shedding from critical components (SEMI F104) and extractables ion exchange resin rinse performance (SEMI C93). Gary has BS and MS degrees in Materials Engineering from Rensselaer Polytechnic Institute (Troy, NY) and an MBA from the University of Texas (Arlington, TX).

CT Associates

Bernie Zerfas is a former facilities engineer at GLOBALFOUNDRIES. He has more than 30 years’ experience in the semiconductor industry with a primary focus on UPW and deionized water systems. Although his initial formal training was in chemistry and chemical engineering, he has had a wide variety of formal and informal educational experiences in a variety of technical disciplines. Mr. Zerfas is also an active member of the UPW sub-group of the ITRS; a recent area of focus has been organic and particulate contamination. His current other areas of responsibility include a spectrum of pollution control systems.

Dr. Rushikesh (Rushi) Matkar is the Pathfinding Technologist for Water purification at Intel’s R&D Center in Hillsboro, OR and a corporate owner for the leadership roadmap of Intel's water management group. Responsible for driving solutions towards the success of Intel's high volume manufacturing roadmap. He is passionate about high purity delivery of utilities, IOT and advanced manufacturing. Between Academia and Industry, Rushi has extensive experience in bringing new IP to Market. Recently, Rushi successfully led the program to introduce EUV Lithography as a patterning solution for fabrication at Globalfoundries. He has served multiple roles within the leading nodes in technology management, operations and engineering management to help multiple technology nodes meet mass-market benefits.

Ovivo

Adam has been with Nalco Water for over 25 years delivering collaborative solutions to water related challenges. As part of the Global High Tech business unit, he works directly with microelectronics clients to maximize reliability, minimize total cost of operation, and support water circularity. Adam has a B.S. in Chemical Engineering from Montana State University - Bozeman.

Ecolab

Alain is a Global Technical Lead and Senior Application Specialist TSI Incorporated, based in Aachen, Germany. With over 30 years in contamination control, cleanroom monitoring, and precision instrumentation, he supports global teams and customers in implementing advanced environmental monitoring strategies across pharmaceutical, semiconductor, and life science industries, including expertise in Facility Monitoring Systems (FMS) Software for real-time data management and compliance.


Before TSI, Alain held senior engineering and project management roles, leading complex cleanroom installations, particle monitoring systems, and facility validation projects. Known for blending technical expertise with practical application, he helps organizations achieve the highest standards of contamination control and regulatory compliance worldwide.


Alain is an active member of ISPE, PDA, IEEE, IRDS, and the UltraFacility community, contributing to industry best practices and innovation in contamination control.

TSI Incorporated

Dan’s almost three decades of experience as a facilities engineering manager, process engineer, design engineer, construction project manager and tool hookup design in the advanced technologies and semiconductor manufacturing industry has led to innovative solutions in his work. His innovations have resulted in industry-changing quality and cost savings breakthroughs, including defect reduction and innovative water reclaim and re-use systems. Dan is well established in the semiconductor industry as an Ultra-pure Water, UHP Chemical and Wastewater expert as shown in his leadership of industry roadmap and collaboration teams. He is certified by ASQ as a six sigma black belt. His roles include Co-Chair of International Roadmap for Device and Systems (IRDS) Yield Enhancement (YE) team, Co-Chair UPW SEMI Standards team, and UP Micro Conference Strategy Team. In addition to many industry publications, Dan also holds a patent for Reduction of Charging Induced Damage in Photolithography Wet Process.

Samsung Austin Semiconductor

Dr. Sriram (Ram) Ramamoorthy is a Supply Chain R&D Engineer/Technologist in Intel’s Fab Materials Organization managing specialty chemicals and filtration. Prior to this role, Ram was a senior process technology development engineer in Intel R&D fab in Oregon developing front end wet etch processes. Ram is an active member in IRDS and SEMI task forces and standards team. Ram received his Ph.D in Chemical Engineering from Rensselaer Polytechnic Institute (Troy, NY).

Intel

Beau Farmer is the Chief Technical Officer at TSI Incorporated, a global leader in precision research, analytical, and measurement instrumentation headquartered in Shoreview, Minnesota. He leads TSI’s efforts to identify and develop emerging technologies through collaborations with universities, small businesses, and industry partners, as well as through strategic acquisitions. Under his leadership, these collaborations have produced new products and government-funded projects such as nanoparticle monitoring instrumentation, miniaturized water-based condensation particle counters, and nanoparticle–protein binding research. Beau earned his Ph.D. in Applied Physics from Cornell University in 1990 where his research focused on 

Defect Dynamics and Wear-Out in Ultra-Thin Dielectrics on Silicon

. Before joining TSI in 2003, he was a tenured physics professor at the New Jersey Institute of Technology (NJIT), with joint appointments at Rutgers and Columbia Universities. He served as principal investigator on over $5 million in research funding, including NSF CAREER, EPA, and state-sponsored MEMS initiative awards. He is a Senior Member of the IEEE, has authored more than 60 peer-reviewed publications and holds 16 U.S. patents.

Dominic is the Intel Director of Construction responsible for managing Intel’s latest leading edge Wafer FAB construction Program at Intel’s Ocotillo Campus Phoenix AZ. This program is part of Intel’s $20b investment on the campus.


Dominic has 35 years’ experience in EPCC project delivery. 16 years working with EPCC firms Costain, Jacobs, Fluor, DPS and 20 years within Intel.


Dominic holds a BSc in Construction Technology and an MSc in Project management.




Brad Herbert is a Sr. Process Engineer with Jacobs. Brad’s areas of focus include water management, water reclaim, ultrapure water, wastewater, chemicals, mentoring, and staff development. Over the past 30 years, Brad has worked as a global facilities engineer, site facilities engineer, facilities manager, design consultant, project manager, and product engineer in the semiconductor and water treatment industries. He has led engineering efforts, managed projects, and supported operations throughout The Americas, Europe, and Asia. His work history includes onsemi, LSI Logic, AMD, IDC (CH2M), DeNora Water Technologies, Monsanto, and Sigma-Aldrich. Brad is a licensed Professional Engineer and has a B.S. Degree in Chemical Engineering from the University of Missouri.

Jacobs

With a B.S. in Electrical Engineering and graduate coursework in Optical and Aeronautical Engineering from the University of Colorado, Steve brings over three decades of experience developing and applying advanced particle monitoring and contamination control technologies across semiconductor, aerospace, and defense sectors.


 (Random Hill Publishers, 2005), authoring Chapter 42: 

Particle Monitoring in Semiconductor Manufacturing

 (2nd ed. 2002; 3rd ed. 2015) and has written more than 100 technical papers and application notes.


His technical expertise has supported cleanroom monitoring programs for the Space Shuttle, James Webb Space Telescope, U.S. Air Force, and SpaceX Dragon Crew Module. He has also lectured at leading institutions including SUNY Albany, National Taiwan University, UCLA, University of Texas, and the University of Colorado, covering topics in particle physics and mechanics.


Today, as Global Product Manager at TSI, he continues driving innovation, shaping product strategy, and helping TSI lead the field in precision environmental monitoring and contamination control.

Project engineer for UPW optimization and conceptual design projects addressing capacity and performance for semiconductor clients. Former UPW system owner at a large semiconductor fabricator.

Tim Robinson

More UltraFacility members