George is Head of Sales at Rugged Robotics. He has a Bachelor's degree in Construction management from the Louisiana State University, and brings a career spanning both commercial construction and construction-technology sales. 

Rugged Robotics

Beau Farmer is the Chief Technical Officer at TSI Incorporated, a global leader in precision research, analytical, and measurement instrumentation headquartered in Shoreview, Minnesota. He leads TSI’s efforts to identify and develop emerging technologies through collaborations with universities, small businesses, and industry partners, as well as through strategic acquisitions. Under his leadership, these collaborations have produced new products and government-funded projects such as nanoparticle monitoring instrumentation, miniaturized water-based condensation particle counters, and nanoparticle–protein binding research. Beau earned his Ph.D. in Applied Physics from Cornell University in 1990 where his research focused on 

Defect Dynamics and Wear-Out in Ultra-Thin Dielectrics on Silicon

. Before joining TSI in 2003, he was a tenured physics professor at the New Jersey Institute of Technology (NJIT), with joint appointments at Rutgers and Columbia Universities. He served as principal investigator on over $5 million in research funding, including NSF CAREER, EPA, and state-sponsored MEMS initiative awards. He is a Senior Member of the IEEE, has authored more than 60 peer-reviewed publications and holds 16 U.S. patents.

TSI Incorporated

Dr. Altun is the co-founder and CEO of UNISERS AG, an ETH Zurich spinoff from Switzerland. UNISERS has been developing a wafer defect inspection and review tool with a sub-10nm detection limit. Dr. Altun has 15-year experience in nanotechnology and optical sensing. Prior to his position at UNISERS AG, he did a Ph.D. at ETH Zurich. He worked at Lawrence Livermore National Laboratories (2011-2014) and Korean Institute of Machinery and Materials (2005-2010). He had his B.Sc. degree from METU (Middle East Tech. Univ.), Turkey and M.Sc. degree at KAIST (Korea Advanced Institute of Science and Technology).

UNISERS

Deena Starkel has B.S. in Environmental Science and M.S. in Environmental Engineering from the University of Idaho. She is a licensed Professional Environmental Engineer with 22+ years of experience in the semiconductor industry as a Facilities Chemical and Water Engineer for Micron Technology. Deena is currently working as a Member of Technical Staff Principal Water Engineer for Micron’s R&D facility and corporate headquarters in Boise, ID and is focused on UPW and wastewater treatment design, process engineering, and operations. Deena has been a member of the UPW IRDS and other groups since 2018.

Micron

Gary Van Schooneveld is President of CT Associates, Inc. Gary has over 30 years of experience with high-purity fluid systems including chemical delivery and ultrapure water and the development and testing of their associated materials and components. He is the author or co-author of more than 45 technical papers and presentations. Gary is co-chair of the SEMI UPW Task Force and an active member of the IRDS UPW and IRDS Critical Components Task Forces. Gary as been a key contributor in the development and validation of SEMI specification for measuring filter retention below 15 nm (SEMI C79), particle shedding from critical components (SEMI F104) and extractables ion exchange resin rinse performance (SEMI C93). Gary has BS and MS degrees in Materials Engineering from Rensselaer Polytechnic Institute (Troy, NY) and an MBA from the University of Texas (Arlington, TX).

CT Associates

Alain is a Global Technical Lead and Senior Application Specialist TSI Incorporated, based in Aachen, Germany. With over 30 years in contamination control, cleanroom monitoring, and precision instrumentation, he supports global teams and customers in implementing advanced environmental monitoring strategies across pharmaceutical, semiconductor, and life science industries, including expertise in Facility Monitoring Systems (FMS) Software for real-time data management and compliance.


Before TSI, Alain held senior engineering and project management roles, leading complex cleanroom installations, particle monitoring systems, and facility validation projects. Known for blending technical expertise with practical application, he helps organizations achieve the highest standards of contamination control and regulatory compliance worldwide.


Alain is an active member of ISPE, PDA, IEEE, IRDS, and the UltraFacility community, contributing to industry best practices and innovation in contamination control.

Hyeongrak Cho is a water treatment expert and researcher at Kookmin University's Smart Water Environment Leading Laboratory (SWELL). Born in 1986, Cho obtained his Ph.D. in Environmental Engineering from Kookmin University in Seoul, Korea, in September 2019. During his graduate studies, Cho focused his research on the treatment of water, wastewater, and desalination using membranes. In particular, he developed expertise in the treatment of highly concentrated salt wastewater, publishing a paper entitled "Effect of pre-treatment and operating conditions on the performance of membrane distillation for the treatment of shale gas wastewater" in Desalination (IF 6.035). Cho has conducted two successful projects on the treatment of highly concentrated wastewater. The first involved treating shale gas wastewater generated in Texas using the membrane distillation technique, and the second involved treating highly concentrated desalinated seawater using a semi-pilot MD instrument. Manuscripts from these projects are currently being submitted to high-impact water treatment journals. Cho's experience also includes knowledge of MF/UF, coagulation, and sedimentation for pre-treatment and chemical, physical, and ultrasonic washing for post-treatment. He has collaborated on desalination projects involving forward osmosis (FO), reverse osmosis (RO), reverse electrodialysis (RED), and capacitive deionization (CDI). In addition to his research, Cho is studying modeling for the automation of water treatment plants using Cyber-Physical Systems (CPS), Life Cycle Assessment for decreasing Carbon emission, Computational Fluid dynamics, and pipe analysis and design for Ultra pure water supply. Cho believes that his strong understanding of general and next-generation water treatment techniques and his experience in pilot operations make him a valuable asset to any research project.

Senior Process Chemical Engineer with 30+ years of experience working in Facilities Operation Engineering and Design within the semiconductor manufacturing industry. He is a Subject Matter Expert in chemicals, chemical systems, and application for semiconductor manufacturing, pollution abatement, water and wastewater treatment and supporting HazWaste systems and operation.

Microelectronics UPW Technical Director for Evoqua Water Technologies, LLC. Responsible for process development, optimization, troubleshooting and technical support of high purity water systems within the semiconductor, nanotechnology and solar markets. Also responsible for operating and maintaining an E-1.2 UPW system in the Evoqua Microelectronics Technology Suite. Has been with Evoqua (starting with IWT) for over 37 years in various roles responsible for developing, growing and supporting products and technologies within the Corporate and Industrial segments. These roles include; Product Manager, Process Development Manager and Applications Engineering Manager. Bachelor of Science in Chemical Engineering, with emphasis on high-energy physics, from the University of Wisconsin, Madison, and located at the Evoqua office in Rockford, Illinois. Authored and co-authored several papers on topics including nanofiltration, reverse osmosis, ultrafiltration, advanced oxidation and particle removal for the semiconductor industry.

Xylem

Dr. Sriram (Ram) Ramamoorthy is a Supply Chain R&D Engineer/Technologist in Intel’s Fab Materials Organization managing specialty chemicals and filtration. Prior to this role, Ram was a senior process technology development engineer in Intel R&D fab in Oregon developing front end wet etch processes. Ram is an active member in IRDS and SEMI task forces and standards team. Ram received his Ph.D in Chemical Engineering from Rensselaer Polytechnic Institute (Troy, NY).

Intel

Latif joined Intel in 2005 as Microcontamination Engineer for the startup of 45nm process at Fab-32 in Arizona. He has been involved in four more process transfers to Arizona, including the latest 10nm startup. He is technical expert in Microcontamination, including AMC’s, with over 25 years of experience in environmental, semiconductor testing, AMC’s and other Microcontamination problem solving. Prior to joining Intel, Latif worked as a Research Scientist at Balazs Analytical and as a Technical Support Manager at ChemTrace. Latif has participated in collaborative efforts with many chemical and equipment manufacturing companies and organizations including, Sematech, Factory Mutual Research Corporation, in development of criteria for approval of materials suitable for use in semiconductor fabs.

I am a professional chemical engineer located in Kansas City. I focused on water and wastewater treatment design for the first 15 years of my career before transitioning into engineering and project management where I have mainly managed large water and wastewater projects for 10 years.

Kiewit

Dave Buesser is the COO of FTD Solutions. He is a mechanical engineer from the University of Arizona, and he has spent his entire 27-year career driving advanced technology facilities forward. He began with a focus on semiconductor process piping design and proceeded to build likely the deepest experience in the industry on UPW distribution systems. He has led the design efforts for several UPW plants for greenfield semiconductor facilities and has also led many multi-discipline design teams on microelectronics facilities. Today, his focus is to bring world-class expertise coupled with unique tools to help solve the most pressing UPW and facilities challenges facing advanced industries.

George Baños

Biography

George's Insights

Accelerating Fab Delivery with AI: Entering a New Era of Design and Construction

George's Technical Resources

More UltraFacility members