Samsung Austin Semiconductor

After more than 20 years as water treatment engineer at Rousset plant (France), in charge of subcontractor team (2 engineers, 2 technicians), operating UPW plant and waste water plant, I'm water program manager, technical leader for Ultra Pure Water Water treatment for STMicroelectronics Front-End plants (France, Italy, Singapore) - Technical support (project and troubleshooting) - Quality and monitoring standardization - Water saving focus - Invest technical approval - UPW engineers team coordination Ultra pure water specialist.

STMicroelectronics

Tina is a civil engineer working for Kokosing, a self-performing heavy industrial contractor in the Midwest and Mid-Atlantic. She holds a BS in CE from Case Western Reserve University and a MS in CE from Cleveland State University. Tina is a licensed PE in IL, IN, MI, PA, OH.

Kokosing Industrial

Please see my LinkedIn profile: https://www.linkedin.com/in/sergei-shatsman/

FTD Solutions

Bernie Zerfas is a former facilities engineer at GLOBALFOUNDRIES. He has more than 30 years’ experience in the semiconductor industry with a primary focus on UPW and deionized water systems. Although his initial formal training was in chemistry and chemical engineering, he has had a wide variety of formal and informal educational experiences in a variety of technical disciplines. Mr. Zerfas is also an active member of the UPW sub-group of the ITRS; a recent area of focus has been organic and particulate contamination. His current other areas of responsibility include a spectrum of pollution control systems.

Hyeongrak Cho is a water treatment expert and researcher at Kookmin University's Smart Water Environment Leading Laboratory (SWELL). Born in 1986, Cho obtained his Ph.D. in Environmental Engineering from Kookmin University in Seoul, Korea, in September 2019. During his graduate studies, Cho focused his research on the treatment of water, wastewater, and desalination using membranes. In particular, he developed expertise in the treatment of highly concentrated salt wastewater, publishing a paper entitled "Effect of pre-treatment and operating conditions on the performance of membrane distillation for the treatment of shale gas wastewater" in Desalination (IF 6.035). Cho has conducted two successful projects on the treatment of highly concentrated wastewater. The first involved treating shale gas wastewater generated in Texas using the membrane distillation technique, and the second involved treating highly concentrated desalinated seawater using a semi-pilot MD instrument. Manuscripts from these projects are currently being submitted to high-impact water treatment journals. Cho's experience also includes knowledge of MF/UF, coagulation, and sedimentation for pre-treatment and chemical, physical, and ultrasonic washing for post-treatment. He has collaborated on desalination projects involving forward osmosis (FO), reverse osmosis (RO), reverse electrodialysis (RED), and capacitive deionization (CDI). In addition to his research, Cho is studying modeling for the automation of water treatment plants using Cyber-Physical Systems (CPS), Life Cycle Assessment for decreasing Carbon emission, Computational Fluid dynamics, and pipe analysis and design for Ultra pure water supply. Cho believes that his strong understanding of general and next-generation water treatment techniques and his experience in pilot operations make him a valuable asset to any research project.

Microelectronics UPW Technical Director for Evoqua Water Technologies, LLC. Responsible for process development, optimization, troubleshooting and technical support of high purity water systems within the semiconductor, nanotechnology and solar markets. Also responsible for operating and maintaining an E-1.2 UPW system in the Evoqua Microelectronics Technology Suite. Has been with Evoqua (starting with IWT) for over 37 years in various roles responsible for developing, growing and supporting products and technologies within the Corporate and Industrial segments. These roles include; Product Manager, Process Development Manager and Applications Engineering Manager. Bachelor of Science in Chemical Engineering, with emphasis on high-energy physics, from the University of Wisconsin, Madison, and located at the Evoqua office in Rockford, Illinois. Authored and co-authored several papers on topics including nanofiltration, reverse osmosis, ultrafiltration, advanced oxidation and particle removal for the semiconductor industry.

Evoqua Water Technologies

Alain is a Global Technical Lead and Senior Application Specialist TSI Incorporated, based in Aachen, Germany. With over 30 years in contamination control, cleanroom monitoring, and precision instrumentation, he supports global teams and customers in implementing advanced environmental monitoring strategies across pharmaceutical, semiconductor, and life science industries, including expertise in Facility Monitoring Systems (FMS) Software for real-time data management and compliance.


Before TSI, Alain held senior engineering and project management roles, leading complex cleanroom installations, particle monitoring systems, and facility validation projects. Known for blending technical expertise with practical application, he helps organizations achieve the highest standards of contamination control and regulatory compliance worldwide.


Alain is an active member of ISPE, PDA, IEEE, IRDS, and the UltraFacility community, contributing to industry best practices and innovation in contamination control.

TSI Incorporated

Beau Farmer is the Chief Technical Officer at TSI Incorporated, a global leader in precision research, analytical, and measurement instrumentation headquartered in Shoreview, Minnesota. He leads TSI’s efforts to identify and develop emerging technologies through collaborations with universities, small businesses, and industry partners, as well as through strategic acquisitions. Under his leadership, these collaborations have produced new products and government-funded projects such as nanoparticle monitoring instrumentation, miniaturized water-based condensation particle counters, and nanoparticle–protein binding research. Beau earned his Ph.D. in Applied Physics from Cornell University in 1990 where his research focused on 

Defect Dynamics and Wear-Out in Ultra-Thin Dielectrics on Silicon

. Before joining TSI in 2003, he was a tenured physics professor at the New Jersey Institute of Technology (NJIT), with joint appointments at Rutgers and Columbia Universities. He served as principal investigator on over $5 million in research funding, including NSF CAREER, EPA, and state-sponsored MEMS initiative awards. He is a Senior Member of the IEEE, has authored more than 60 peer-reviewed publications and holds 16 U.S. patents.

Latif joined Intel in 2005 as Microcontamination Engineer for the startup of 45nm process at Fab-32 in Arizona. He has been involved in four more process transfers to Arizona, including the latest 10nm startup. He is technical expert in Microcontamination, including AMC’s, with over 25 years of experience in environmental, semiconductor testing, AMC’s and other Microcontamination problem solving. Prior to joining Intel, Latif worked as a Research Scientist at Balazs Analytical and as a Technical Support Manager at ChemTrace. Latif has participated in collaborative efforts with many chemical and equipment manufacturing companies and organizations including, Sematech, Factory Mutual Research Corporation, in development of criteria for approval of materials suitable for use in semiconductor fabs.

Intel

Dan’s almost three decades of experience as a facilities engineering manager, process engineer, design engineer, construction project manager and tool hookup design in the advanced technologies and semiconductor manufacturing industry has led to innovative solutions in his work. His innovations have resulted in industry-changing quality and cost savings breakthroughs, including defect reduction and innovative water reclaim and re-use systems. Dan is well established in the semiconductor industry as an Ultra-pure Water, UHP Chemical and Wastewater expert as shown in his leadership of industry roadmap and collaboration teams. He is certified by ASQ as a six sigma black belt. His roles include Co-Chair of International Roadmap for Device and Systems (IRDS) Yield Enhancement (YE) team, Co-Chair UPW SEMI Standards team, and UP Micro Conference Strategy Team. In addition to many industry publications, Dan also holds a patent for Reduction of Charging Induced Damage in Photolithography Wet Process.

Dr. Altun is the co-founder and CEO of UNISERS AG, an ETH Zurich spinoff from Switzerland. UNISERS has been developing a wafer defect inspection and review tool with a sub-10nm detection limit. Dr. Altun has 15-year experience in nanotechnology and optical sensing. Prior to his position at UNISERS AG, he did a Ph.D. at ETH Zurich. He worked at Lawrence Livermore National Laboratories (2011-2014) and Korean Institute of Machinery and Materials (2005-2010). He had his B.Sc. degree from METU (Middle East Tech. Univ.), Turkey and M.Sc. degree at KAIST (Korea Advanced Institute of Science and Technology).

UNISERS

I am a professional chemical engineer located in Kansas City. I focused on water and wastewater treatment design for the first 15 years of my career before transitioning into engineering and project management where I have mainly managed large water and wastewater projects for 10 years.

Luke Wilson

Badges

More UltraFacility members